Lumber and carpentry
Board feet and stair dimensions.
Board Foot Calculator
Convert lumber dimensions into board feet, and price the order.
Stair Calculator
Work out risers, treads, total run and stringer length from a total rise.
Wainscoting Calculator
Count pre-sized wainscoting panels from the net wall run and actual panel width.
Crown Moulding Calculator
Estimate crown moulding, baseboard or door casing stock from a room perimeter, a measured run or the openings to be cased.
Feet and Inches Calculator
Add, subtract, multiply or divide lengths written in feet, inches and fractions, with the answer read to the nearest sixteenth of an inch.
Framing Calculator
Count the studs for a wall at 16 or 24 inches on centre, with the extra studs your corners and openings take, and the plate stock to buy.
Plywood Calculator
How many sheets of plywood or OSB cover a floor, a wall or a pitched roof, with openings taken off and the roof slope allowed for.
Board and Batten Calculator
Boards and battens for a wall of vertical board and batten siding, from the wall, board width, gap and openings.
Shiplap Calculator
How many shiplap boards cover a wall or ceiling, from its area, the exposed face of each board and the board length.
Epoxy Resin Calculator
How much epoxy resin a river table, casting or countertop pour takes, how many kits to buy, and how much resin and hardener to measure out.
Miter Angle Calculator
The miter saw setting for a frame with any number of sides or for any corner, with the cut angle and the inside length of each frame piece.
Arch Calculator
The radius, arc length and centre point of a segmental arch from its span and rise, and the height of the curve at any point for laying it out.
Spiral Staircase Calculator
The riser height, number of treads, tread angle and going of a spiral staircase from its floor-to-floor rise, rotation and diameter.
Cabinet Door Calculator
The size to make overlay or inset cabinet doors from the opening, the overlay or reveal, and the gap between a pair of doors.
Metal Weight Calculator
Estimate the weight of steel or aluminium plate, round bar, box tube and angle from its dimensions.
Shed Materials Calculator
Estimate the floor, wall and roof sheets plus the studs, joists and rafters for a rectangular gable shed in one go.
Lumber Weight Calculator
How much a board, a stack of studs or a load of hardwood weighs, from its size, the species and how wet the wood is, using the USDA Wood Handbook.
Kerf Bending Calculator
How far apart to cut the kerfs to bend a board or sheet to a radius, how deep to cut them, and how many cuts the curve takes.
Lumber is sold by the piece, by the linear foot and by the board foot, and a single project often uses all three. Framing and sheet goods come in stock sizes, so the useful answer is how many studs, sheets or lengths to buy with the cut-offs allowed for. Hardwood is priced by the board foot, which is a volume, so a thicker board costs more per foot of length. Trim, moulding and wall panelling are bought by the length and cut to angles. The calculators here cover all three kinds of order, along with stair layout, mitre and arch geometry, and jobs where the arithmetic is the whole difficulty, such as kerf bending and spiral stairs. Nominal and actual sizes differ: a 2x4 is 1.5 by 3.5 in once dried and planed, and several of these calculators ask which one you mean. Stair rise, run, headroom and guard rules are set by local building codes, which vary, so check yours before cutting stringers.