Decking and fencing
Deck boards, fence posts, rails and pickets.
Fence Calculator
Count the posts, rails and pickets a run of fence needs.
Deck Board Calculator
Count the deck boards a deck needs, in rows, linear feet and boards.
Baluster Calculator
Count evenly spaced balusters from an opening, baluster width and permitted clear gap.
Deck Joist and Beam Calculator
Count joists, beam lines and beam members from an existing deck framing layout.
Deck Stain Calculator
How much stain a deck or fence takes, counting the floor, both faces of the railing and the stairs, from the coverage on the can and the number of coats.
Pergola Calculator
Count the posts, beams, rafters and purlins a pergola needs from its footprint, spacing and overhang, with each cut length.
A deck or a fence is mostly a counting problem. Boards, joists, posts, rails, pickets and balusters come in fixed lengths and widths, so the question is how many whole pieces a layout takes rather than how much area it covers. The calculators here count pieces from the dimensions and spacing you give them, and round up, because a board short on the last row stops the job. Spacing drives most of the answer. A quarter-inch picket gap, joists at 16 in rather than 12 in, or a smaller baluster gap all change the count more than the length does. Measure the actual run, including steps and returns, and buy stock lengths that divide it with the least offcut. Stain and sealer are the exception: they are an area, and a fence has two faces. Guard heights, baluster gaps, joist spans and post depths are set by building codes that vary by location, so check your local code before you buy.