Roofing
Roof pitch, roof area and shingle bundles.
Roof Pitch Calculator
Convert between roof pitch, angle and rise over run, and get the rafter length.
Roofing Shingle Calculator
Work out the roof area and how many bundles of shingles it takes to cover it.
Gutter Calculator
Count stock gutter sections and downspouts for one or more identical straight runs.
Roof Area Calculator
The surface area of a gable, hip, shed or gambrel roof from the building’s footprint, overhang and pitch, in square feet or metres and roofing squares.
Roofing Calculator
From the building’s size, overhang, pitch and roof type to the roof area, roofing squares and bundles of shingles to buy, with an optional installed cost.
Metal Roofing Calculator
How many metal roof panels a gable or shed roof takes and how long to cut them, from the building, the pitch, the overhangs and the panel’s coverage width.
Ice and Water Shield Calculator
Rolls of ice and water shield for your eaves, from their length, the pitch and how far up the roof it must reach.
Roofing is ordered in squares, and a square is 100 square feet of roof surface, not of floor plan. The difference is the pitch: a steeper roof has more surface over the same footprint, so the first step on any roofing job is turning the building's length and width into true roof area. The calculators here start from measurements you can take on the ground, the footprint, the overhang and the pitch, and work up to shingle bundles, metal panels, gutter sections and rolls of ice and water shield. Hips, valleys and dormers add cutting waste, so a complicated roof needs a larger allowance than a simple gable. Pitch can be measured from the attic or at a gable end with a level and a tape rather than on the roof itself. Underlayment, ice barrier and fastening requirements depend on local building codes and on the shingle maker's instructions, which vary, so check both before ordering.