CalcGallery

Countertop Calculator

Work out the square footage of a straight, L or U shaped counter, with backsplash and cutouts, plus the edge length to finish.

Built by AbhiLast reviewed November 6, 2026

Units
First wall run

Your measurements

Wall to the front of the cabinets plus any standard lip. Measure your own.

Leave at 0 for none. It runs along every wall.

Sink and hob openings together. Many fabricators charge for the full top, so ask before relying on this.

Optional. From your supplier, for a rough slab count.

Result

21.25 ft²

No waste is added, because a fabricator nests the pieces. The slab row is the least the area could fit on.

Counter top
21.25 ft² (1.97 m²)
Backsplash
0 ft² (0 m²)
Front edge to finish
10 ft (120 in, 3.05 m)
Open ends of the run are not counted
Report a problem with this calculator
Your entries are kept on this device only.

Results are estimates for planning only. Actual needs vary with site conditions, products and workmanship. Always confirm quantities with your supplier and follow local building codes and manufacturer instructions. Read the full disclaimer

How to use the Countertop Calculator

  1. Pick a straight, L or U layout, and measure each run along the wall into the corner.
  2. Enter the counter depth, and any extra overhang at the front.
  3. Add a backsplash height and cutouts if you have them.
  4. Enter a slab area for a rough lower limit on the number of slabs.

How the area is worked out

Each run is measured along the wall, so an L shape would count the corner square twice if the runs were simply added. One depth comes off the combined length for each corner:

Top area   = (sum of runs − corners × depth) × depthFront edge = sum of runs − 2 × corners × depthBacksplash = sum of runs × heightTotal      = top + backsplash − cutouts

What pushes the price beyond area

Quotes usually add edge profiles, cutouts, seams and installation. That is why the page keeps the finished edge separate from the area: it is the second number a fabricator will ask you for.

Measure, then template

Walls are rarely straight, so treat this as a budget number. Before anything is cut, a fabricator normally makes a template from the installed cabinets. Long overhangs may also need support, and that advice should come from your fabricator for your material.

With your numbers

  1. Top = wall runs less the shared corners × depth = 33.73 ft²
  2. Backsplash = wall runs × height = 6 ft²
  3. Total = top + backsplash − 6 ft² cutouts = 33.73 ft²

Quick reference

No waste is added, because a fabricator nests the pieces. The slab row is the least the area could fit on.

Common jobs, worked out with the options this calculator starts on for United States.
JobTotal countertop area
10 ft straight run21.25 ft²
10 × 8 ft L shape33.73 ft²
8 × 12 × 8 ft U shape53.8 ft²
6 ft run with 4 in backsplash14.75 ft²
6 ft island with 12 in overhang24 ft²
3 m straight run1.92 m²
3 × 2.4 m L shape2.99 m²

Common questions about the Countertop Calculator

How do I measure an L shaped countertop?
Measure each wall run into the corner, then let the page take off the shared square. A 10 by 8 ft L at 25.5 in deep is about 33.7 square feet, not 38.3.
Should I subtract the sink cutout?
Often not. Many fabricators price the full top and charge for the cutout, so the cutout saves nothing. Use the field only if your quote works that way.
How many slabs do I need?
This page gives the least the area could fit on. Grain direction, seam placement and the shape of each piece can add another slab, so your fabricator lays it out before you buy.
Does the edge length include the ends?
No. It counts the front edge between the walls. Add any open ends yourself, such as the end of a run beside a fridge.

Report a problem with this calculator