CalcGallery

Spray Foam Calculator

Turn an area and foam thickness into board feet, the number of kits to buy, and the R-value that thickness reaches.

Built by AbhiLast reviewed November 6, 2026

Units
Foam thickness

Your measurements

The theoretical yield printed on the box. Cold or poorly mixed foam yields less.

Optional. Open-cell and closed-cell foam differ, so use the figure for your exact product.

Result

Buy 2 kitsEstimate

Rounded up to whole kits

No extra is added by default. Use Custom if you expect overspray, trimming or a cold pour.

Board feet of foam
1,000
Foam volume
83.33 ft³ (2.36 m³)
Thickness used
2 in (0.17 ft, 50.8 mm)
Report a problem with this calculator
Your entries are kept on this device only.

Results are estimates for planning only. Actual needs vary with site conditions, products and workmanship. Always confirm quantities with your supplier and follow local building codes and manufacturer instructions. Read the full disclaimer

How to use the Spray Foam Calculator

  1. Enter the area you plan to spray, adding up each wall or bay.
  2. Enter the foam thickness you want.
  3. Enter the yield in board feet printed on the kit.
  4. Add R per inch from the data sheet if you want the R-value at that thickness.

The sum behind a kit count

Board feet = area in ft² × thickness in inchesKits = board feet × (1 + allowance) ÷ yield, rounded upR reached = thickness in inches × R per inch

Board feet are used in every market because that is how kits are labelled, so metric visitors still enter the kit yield in board feet and the page converts their area and thickness.

Passes matter as well as totals

Many products limit how thick one pass can be, because thick lifts can overheat as they cure. Read the maximum pass on the data sheet and plan your thickness in passes.

Scope and safety

Two-component foam gives off fumes while it cures. Follow the product’s rules on respirators, ventilation and how long to keep others out. Foam also usually needs a thermal barrier in living spaces, so check the product listing and local code before covering it or leaving it exposed.

With your numbers

  1. Board feet = area in ft² × thickness in inches = 1,000
  2. That ÷ 600 board feet per kit, rounded up to 2 kits

Quick reference

No extra is added by default. Use Custom if you expect overspray, trimming or a cold pour.

Common jobs, worked out with the options this calculator starts on for United States.
JobKits to buy
500 ft² at 2 in, 600 kit2
1,000 ft² at 3 in, 600 kit5
200 ft² rim joist at 2 in, 200 kit2
120 ft² at 1 in, 200 kit1
1,500 ft² roof deck at 5 in, 600 kit13
50 m² at 50 mm, 600 kit2
100 m² at 75 mm, 600 kit6

Common questions about the Spray Foam Calculator

How many board feet is 500 square feet at 2 inches?
Multiply the square feet by the inches: 500 × 2 is 1,000 board feet. Two 600 board foot kits cover that, with 200 to spare.
What is a board foot of spray foam?
One square foot of foam one inch thick. Kits are sold by the board feet they can make, so a 600 kit could cover 300 square feet at 2 inches.
Why did my kit cover less than the box said?
The number on the box is a theoretical yield. Foam and surfaces that are too cold, or a poor mix, can yield noticeably less, so check the temperature range on the product.
Which thickness or R-value do I need?
That depends on your climate, assembly and local energy code, so this page does not choose one. It tells you what your thickness reaches.

Report a problem with this calculator