CalcGallery

Concrete Slab Calculator

Work out the concrete volume for a rectangular slab and how many bags of premix to buy.

Built by AbhiLast reviewed September 26, 2026

Units
LengthWidthThickness

Your measurements

Most residential slabs are 100 to 150 mm, or 4 to 6 in. Check your local building code.

Optional. What one bag of this size costs where you are buying, for a total with the result.

Optional. Your supplier’s delivered price, per cubic yard in imperial and per cubic metre in metric. Enter it with a bag price to compare the two.

Optional. The flat charge your supplier adds to a small order.

Optional. The order size at which your supplier stops charging the fee.

Result

Enter length and width to see the result.

Your entries are kept on this device only.

Results are estimates for planning only. Actual needs vary with site conditions, products and workmanship. Always confirm quantities with your supplier and follow local building codes and manufacturer instructions. Read the full disclaimer

How to use the Concrete Slab Calculator

  1. Measure the length and width of the slab. For a shape that is not a rectangle, split it into rectangles and add the results.
  2. Enter the thickness. Most residential slabs fall between 100 and 150 mm, or 4 and 6 in.
  3. Pick the bag size you can actually buy. The list follows your region.
  4. Read the bag count. It already includes a 10% allowance, which you can change under More options.
  5. If you know what a bag costs, enter it for the price of the whole order.

How it is calculated

The volume of a rectangular slab is its three dimensions multiplied together:

Volume = length × width × thickness × number of slabs

All three have to be in the same unit before they are multiplied, which is why entering a thickness in inches next to a length in feet is safe here: the conversion happens before the multiplication, not after.

The waste allowance is applied to that volume, and only then is the bag count rounded up:

Bags = ceil( volume × (1 + waste) ÷ yield per bag )

Rounding up last matters. Rounding each step would quietly add a bag or two that you do not need.

The yield is how much set concrete one bag of dry premix makes. It is not the bag’s weight: dry mix is denser than the finished slab, and a standard 80 lb bag makes about 0.60 ft³. If your bag states a different figure, put it in under More options and everything downstream follows it.

Bags against ready-mix on price

With a bag price entered, the total sits under the bag count, and the cubic yards or cubic metres beside it are the figure to read to a ready-mix supplier for a delivered quote. Small loads often carry an extra charge from the plant, so bags tend to win on a shed base and lose well before a driveway. The page stores no prices, so both sides of the comparison are the ones you were quoted.

Pouring a driveway

A driveway is a slab that cars drive on, so the sum is the same and the thickness buttons cover the usual range: a patio at 4 in, a driveway commonly at 5 or 6 in, or 125 to 150 mm. The right thickness for yours depends on the vehicles, the ground and your local code, so check what applies before you choose.

What changes is the scale. Almost any driveway is several cubic yards, which is hundreds of bags, so the useful numbers here are the cubic yards or cubic metres, which is how ready-mix is ordered. The waste allowance matters more on a driveway too, because the sub-base is rarely dead level over that much ground, and a load that comes up a quarter of a yard short cannot be topped up from a bag without a joint.

Split a driveway with a flared apron or a turning bay into rectangles, work out each one here, and add the volumes before ordering.

Practical tips

Buy one extra bag, not ten. The 10% allowance covers an uneven sub-base. It does not cover a bag that splits, or a wheelbarrow that tips. One spare bag is cheap insurance; unopened premix keeps for months if you store it dry and off the floor.

Mixing by hand is slower than you think. A single 80 lb bag is a few minutes of work with a mixer and rather more with a shovel. Twenty bags is most of a day. Work out the bag count before you decide how you are pouring, not after.

Pour a slab in one go where you can. Concrete placed against concrete that has already started to set forms a cold joint, which is a weakness. If the count says two days of mixing, that is a strong argument for ready-mix.

The sub-base is not optional. Concrete is strong in compression and weak in tension, so it cracks where the ground beneath it moves. A compacted gravel base gives it something stable to sit on and lets water drain away.

Measure the depth in several places. Excavations are deeper in the middle than at the edges more often than not. Measuring in four or five spots and using the largest figure is more reliable than measuring once.

Local codes vary. Thickness, reinforcement, sub-base depth and the need for a permit all differ by jurisdiction, and for anything structural they matter. Check your local building code and speak to a professional if the slab is carrying a building.

With your numbers

  1. Volume = 10 ft × 12 ft × 0.3333 ft = 40 ft³
  2. With 10% waste = 44 ft³
  3. Bags = 44 ft³ ÷ 0.6 ft³ per bag, rounded up to 74

Quick reference

Ground rarely sits level, so slabs run deeper than planned. This includes 10% extra.

Common jobs, worked out with the options this calculator starts on for United States.
JobBags to buy
8 × 8 ft shed base, 4 in thick40
10 × 10 ft patio, 4 in thick62
10 × 12 ft slab, 4 in thick74
12 × 12 ft slab, 4 in thick88
20 × 20 ft garage, 6 in thick367
12 × 24 ft single driveway, 5 in thick220
20 × 24 ft double driveway, 6 in thick440
3 × 3 m slab, 100 mm thick106
4 × 4 m slab, 100 mm thick188
6 × 4 m garage, 150 mm thick423
3 × 7 m driveway, 125 mm thick309

Where the numbers come from

The fixed figures this calculator relies on, and the published source each one was checked against. How the calculators are built and checked

2 sources
  1. Quikrete, Concrete Mix No. 1101 data sheet (Oct 2022), Yield: 0.30, 0.375, 0.45 and 0.60 ft³ for 40, 50, 60 and 80 lb bags, https://www.quikrete.com/PDFs/DATA_SHEET-Concrete%20Mix%201101.pdf; Sakrete High-Strength Concrete Mix (Oldcastle APG): 0.6 ft³ per 80 lb, https://orders.oldcastleapg.com/dry-mixes-masonry/dry-mixes/sakrete-high-strength-concrete-mix-80-lb-gray

    Used for

    • Volume of set concrete per kilogram of dry premix. Equivalent to 0.60 ft³ per 80 lb bag, 0.45 per 60 lb, 0.375 per 50 lb, 0.30 per 40 lb, about 0.0094 m³ per 20 kg bag.
  2. NRMCA, CIP 31 "Ordering Ready Mixed Concrete": order 4% to 10% more than the plan estimate, https://www.nrmca.org/wp-content/uploads/2021/01/31pr.pdf; US Army FM 5-428 Concrete and Masonry (1998), para 3-20: add 10% up to 200 yd³

    Used for

    • Slab on ground allowance: 10% extra

Common questions about the Concrete Slab Calculator

Is it cheaper to use bags or order a truck?
Enter your bag price, the ready-mix rate, the short-load fee and the order size where that fee stops. The page prices both and shows the volume where ready-mix starts to win. At 6.00 for an 80 lb bag, 170 per cubic yard and a 100 fee, that crossover is 1 cubic yard. Prices are yours, so the answer changes with your supplier.
How many bags of concrete do I need for a slab?
A 10 by 12 foot slab 4 in thick takes 74 bags of 80 lb premix. It is 40 ft³, or 44 ft³ with the 10% allowance, and an 80 lb bag makes roughly 0.60 ft³, so 44 ÷ 0.60 rounds up to 74.
How many 80 lb bags of concrete are in a cubic yard?
About 45. A cubic yard is 27 ft³ and an 80 lb bag of premix makes roughly 0.60 ft³, so 27 ÷ 0.60 comes to 45 bags. At that point ready-mix is usually cheaper and far less work.
When should I order ready-mix instead of bags?
Somewhere around a cubic yard, or about 45 bags of 80 lb. Below that, bags are convenient and you can mix at your own pace. Above it you are mixing for hours, and a truck arrives with consistent concrete in one pour, which matters because a slab poured in stages can develop cold joints.
How thick should a concrete slab be?
Residential slabs are commonly 100 mm (4 in) for patios, shed bases and footpaths, and 150 mm (6 in) where vehicles drive. Thickness requirements depend on the load, the ground underneath and your local building code, so treat those as typical ranges and check what applies where you are.
Why does the calculator add 10%?
Ground is rarely as level as it looks, so a slab almost always ends up deeper in places than the number you measured. Ten percent is a common allowance for a slab on ground. You can set it to zero, or to your own figure, under More options.
How much concrete for a driveway?
Treat it as a slab: length × width × thickness. A single-car driveway 12 ft wide and 24 ft long at 5 in thick is 120 ft³, about 4.4 cubic yards before any allowance, which is far past the point where bags make sense. Read the cubic yards here and order ready-mix.
How much will the bags cost?
Type the price of one bag, of the size you chose, into Price per bag. The total is that price times the bags to buy, which already carry the allowance and are rounded up, because the merchant charges for whole bags. A mixer, delivery and the gravel base are not in it.
Does this include the gravel base?
No. This works out the concrete only. A slab normally sits on a compacted sub-base of 100 to 150 mm of gravel, which you should calculate separately.
What if my slab is not a rectangle?
Break it into rectangles, calculate each one, and add the bag counts. Round up once at the end rather than for each piece, or you will buy more than you need.

Report a problem with this calculator